Eufy Omni S1 Pro: the roller mop robot that rinses continuously

This post is also available in: Français

Eufy, the consumer brand of the Anker group, offers with the Omni S1 Pro a robot vacuum and mop that approaches the mopping issue from another angle. Where most robots drag two round pads, the S1 Pro relies on a HydroJet mopping roller that rinses continuously while it moves. Add 8,000 Pa of suction, an all-in-one station that washes and dries the roller, and you get a robot designed to make mopping genuinely clean. Sold since 2024, it remains offered at around €999 and deserves a closer look.

For context, in the robot-mop segment, the big question is not so much suction as clean mopping. Many models simply move a damp mop that redistributes dirt. Eufy targets this precise point with its roller that rinses constantly. Let’s see what the brand highlights, based on its announcements.

Eufy Omni S1 Pro HydroJet roller robot vacuum and mop

A roller that rinses while cleaning

The Omni S1 Pro’s signature is its HydroJet roller system. Rather than a fabric pad that becomes soaked and dirty, the robot turns a roller, around 170 rotations per minute according to Eufy, which is continuously rinsed with clean water during its pass. Dirty water is then suctioned up and removed separately. The claimed result is a floor always cleaned with a clean surface, without the grey streak effect familiar from conventional mops.

For carpets, the mopping module lifts by around 12 mm, allowing the robot to move from washed parquet to vacuumed carpet without soaking it. Eufy also claims an ozone-based Eco-Clean system for station maintenance and odour reduction.

Announced technical specifications

Eufy emphasises mopping quality, suction and station autonomy.

Self-rinsing HydroJet mopping roller: the product’s core, a roller rinsed continuously to mop with clean water rather than spread dirty water.

8,000 Pa suction: a power level that remains moderate compared with the 20,000 or 30,000 Pa of recent flagships, but targets daily use on hard floors and thin carpets above all.

Mopping-module lift, 12 mm: to cross carpets without wetting them and alternate vacuuming and mopping.

Obstacle avoidance: the robot includes sensors able to detect and go around objects as small as 2.5 cm, according to Eufy, to avoid cables and small toys.

All-in-one station: automatic washing and drying of the roller, dust emptying and fresh- and dirty-water management, to reduce manual maintenance.

Specification sheet

Specification Value
Type Roller robot vacuum and mop, all-in-one station
Suction 8,000 Pa
Mopping Self-rinsing HydroJet roller, around 170 rpm
Mopping-module lift Around 12 mm, for crossing carpets
Obstacle avoidance Claimed detection from 2.5 cm
Station maintenance Roller washing and drying, ozone Eco-Clean
Battery life Up to 180 minutes claimed
Station Auto-emptying, fresh- and dirty-water management
Indicative price in France Around €999

Price and options

On price, the Omni S1 Pro is offered at around €999 on the official Eufy France store, with a two-year statutory warranty and free returns within 30 days. It is a premium position, justified by the roller system and complete station, but below the most expensive robots on the market. Depending on the period and retailer, bundles with dust bags or extra filters can change the total, and occasional promotions make it more accessible.

App and automation

The Omni S1 Pro is controlled through the Eufy Clean app, which handles mapping, cleaning zones, room-by-room profiles and suction power. The entire logic relies on the roller-and-station pair: the roller mops and rinses continuously, while the station cleans and dries it between sessions to avoid the damp smell associated with poorly maintained mopping robots. As with any connected device equipped with sensors and sometimes a camera, it remains prudent to check privacy and data-management settings in the app.

So, is this Eufy Omni S1 Pro interesting?

On paper, the Omni S1 Pro plays a slightly different tune from the race for Pascals: it does not seek to break suction records, but to mop genuinely cleanly thanks to its continuously rinsed roller. This approach will appeal to anyone disappointed by mops that spread dirt instead of removing it. The complete station and carpet lift complete a coherent package.

It still needs to prove mopping quality over time, roller-maintenance ease and the real effectiveness of its 8,000 Pa suction on thicker carpets, all points a specification sheet cannot settle. At €999, it faces strong competition, but its mopping approach has plenty of appeal. I hope to have the opportunity to test it one day, because on paper Eufy offers a credible alternative here to dual-pad robots.

FAQ

How much does the Eufy Omni S1 Pro cost?
It is offered at around €999 on the official Eufy France store, with a two-year statutory warranty and free returns within 30 days.
What is the Eufy S1 Pro's HydroJet system?
It is a mopping roller rinsed continuously while cleaning, around 170 rpm according to Eufy, to keep passing a clean pad rather than spreading dirty water across the floor.
Can the Omni S1 Pro handle rugs and carpets?
Yes. The mopping module lifts by around 12 mm to pass over carpets without wetting them, according to the manufacturer.
Since when has the Eufy Omni S1 Pro been available?
It has been sold since 2024 and remains in the Eufy catalogue. We present it here because it remains a relevant roller-mop robot reference.

Newsletter

Pour ne louper aucun article du blog (tests, news, concours 😎)

Nous ne spammons pas ! Consultez notre politique de confidentialité pour plus d’informations.

Leave a Reply